Pictures in the Fermilab Linac

These pictures were taken when we opened up tank 2 in the Fermilab Linac. Tank 2 accelerates the H-minus ion beam from 10 MeV to about 22 MeV. It is an "Alverez" type drift-tube linac structure. We opend the tank because of a bad drift tube in the beginning of the tank.

Click on the picture to obtain a larger (0.5 MB) version.

Larry Allen entering Tank 2	L.A. about half-way down Tank 2	The RF end plate of Tank 2	Same. Note the discoloration due to sparking
Same	The emittance probe between Tanks 1 and 2	The bulk tuner for Tank 2.	Same.
Emit Probe Mirror viewing emittance slit	Same. Out of focus

This series of pictures is of the downstream half of the Fermilab Linac. This half is powered by 805 MHz RF systems.

Area between Tank 5 and 1st transition section before installtion of BLD	Same Different angle	Area between 1st transition section and "Vernier"	Same. Different angle.
Area between Venier and Module 1	Same Different angle	BLD 0-4	Area between M1 & M2
Area between M6 & M7	Area between M2 & M3	Input to M1

Big Pictures

These pictures are 8x10 originals and are about 0.1 MB each to download.

Detailed picture of BLD 0-1	400 MeV Area looking from Lambertson downstream	400 MeV Area looking upstream
A prototype BPM and a quarter	A prototype wire scanned and it's E&M foundation