waverunner_set_offset_c (ul_scopes)

	status.i4.v = waverunner_set_offset_c(connect_info.g.v, channel.i4.v,

	This routine sets the offset for a Waverunner series scope channel.

	connect_info	scope connection structure created by a
			prior call to scope_connect
	channel		channel to set (starts at 1)
			(If a value of SCOPE_ALL_CHANNELS is passed
			 for this argument, all channels will be set.)
	offset		desired offset value

	This function returns ACNET status values as follows:

	OK			success
	CLIB_SETLOCK		settings are locked
	CLIB_INVARG		invalid connection information passed
	CLIB_GENERIC_ERROR	error setting scope information
	otherwise		other ACNET error

	This function requires the following include files:

	ul_scopes_h:scopelib_h, ul_scopes_h:lecroydefs_h, acnet_errors_h

	Related functions:

	waverunner_enable_channel_c, waverunner_set_range_c,
	waverunner_request_measurement, waverunner_reset_scope,
	waverunner_get_config_info, waverunner_get_trigger_config_info_c,
	waverunner_get_waveform_c, waverunner_get_id_string_c, scope_connect,
	scope_disconnect, scope_info

	C/C++ usage:

	static const char	ip_name[] = "node_address.fnal.gov";
	int	status;
	int	channel = CHANNEL;
	double	offset = OFFSET_VALUE;
	void	*connect_info;

	status = scope_connect(ip_name,&connect_info);

	status = waverunner_set_offset_c(connect_info,channel,offset);

	status = scope_disconnect(&connect_info);