tds7000_set_edge_trigger_params_c (ul_scopes)

	status.i4.v = tds7000_set_edge_trigger_params_c(connect_info.g.v,

	This routine sets edge trigger parameters for a TDS7000 series scope.

	connect_info	scope connection structure created by a
			prior call to scope_connect
	trigger		trigger to set
			(TDS7000_TRIGGER_A -> trigger A (normal choice),
			 TDS7000_TRIGGER_B -> trigger B)
	[source]	desired trigger source
			(CLIB_DEFAULT_ARG -> use previous value (default),
			 TDS7000_TRIGGER_SOURCE_EXTERNAL -> external trigger,
			 TDS7000_TRIGGER_SOURCE_LINE -> line voltage,
			 TDS7000_TRIGGER_SOURCE_CH1 -> channel 1,
			 TDS7000_TRIGGER_SOURCE_CH2 -> channel 2,
			 TDS7000_TRIGGER_SOURCE_CH3 -> channel 3,
			 TDS7000_TRIGGER_SOURCE_CH4 -> channel 4)
	[coupling]	desired trigger coupling
			(CLIB_DEFAULT_ARG -> use previous value (default),
			 TDS7000_TRIGGER_COUPLING_HF_REJECT -> high frequency
			 TDS7000_TRIGGER_COUPLING_LF_REJECT -> low frequency
			 TDS7000_TRIGGER_COUPLING_NOISE_REJECT -> noise reject)
	[slope]		desired trigger slope
			(CLIB_DEFAULT_ARG -> use previous value (default),
			 TDS7000_TRIGGER_SLOPE_RISING -> rising edge,
			 TDS7000_TRIGGER_SLOPE_FALLING -> falling edge)

	This function returns ACNET status values as follows:

	OK			success
	CLIB_SETLOCK		settings are locked
	CLIB_INVARG		invalid connection information passed
	CLIB_GENERIC_ERROR	error accessing scope information
	otherwise		other ACNET error

	This function requires the following include files:

	ul_scopes_h:scopelib_h, ul_scopes_h:tekdefs_h, acnet_errors_h

	Related functions:

	tds7000_get_id_string_c, tds7000_is_busy, tds7000_enable_channel_c,
	tds7000_set_sample_rate_c, tds7000_set_trace_length_c,
	tds7000_set_num_traces_c, tds7000_set_range_c, tds7000_set_offset_c,
	tds7000_set_trigger_type_c, tds7000_set_trigger_level_c,
	tds7000_request_measurement, tds7000_reset_scope,
	tds7000_get_config_info, tds7000_get_trigger_config_info_c,
	tds7000_get_edge_trigger_config_info_c, tds7000_get_waveform_c,
	scope_connect, scope_disconnect, scope_info

	C/C++ usage:

	static const char	ip_name[] = "";
	int	status;
	int	trigger = TRIGGER;
	int	source = SOURCE;
	int	coupling = COUPLING;
	int	slope = SLOPE;
	void	*connect_info;

	status = scope_connect(ip_name,&connect_info);

	status = tds7000_set_edge_trigger_params_c(connect_info,trigger,source,

	status = scope_disconnect(&connect_info);