status.i4.v = dio_memory_control_c(num_devices.i4.v,
					   operations.i4a.r, errors.i2a.r,

	This routine performs basic control on the current DIO memory pool.
	These control settings are placed into the basic status memory.

	num_devices	number of devices to set
	device_indices	device indices to set
	operations	basic control command
			(DIO_RESET_COMMAND -> reset a device
			 DIO_ON_COMMAND -> turn on a device,
			 DIO_OFF_COMMAND -> turn off a device,
			 DIO_POS_COMMAND -> positive polarity,
			 DIO_NEG_COMMAND -> negative polarity,
			 DIO_RAMP_COMMAND -> ramp command,
			 DIO_DC_COMMAND -> DC command)
	errors		returned device errors
	options		setting options (not used)

	This function returns ACNET status values as follows:

	OK			success
	negative value		overall ACNET error
	positive value		number of devices in error

	This function requires the following include files:

	dbprops_h, diolib_h, acnet_errors_h

	Related functions:

	dio_memory_set_populate_c, dio_memory_get_raw_c, dio_memory_get_c,
	dio_memory_read_raw_c, dio_memory_read_c, dio_memory_get_array_c,
	dio_memory_set_raw_c, dio_memory_set_c, dio_memory_write_c,
	dio_memory_set_array_c, dio_memory_cancel_c, dio_memory_populate_c,
	dio_memory_populate_query, dio_memory_pool_name_to_id_c,

	C/C++ usage:

	short	errors[NUM_DEVICES];
	int	status;
	int	num_devices = NUM_DEVICES;
	static const int	device_indices[NUM_DEVICES] = {14430, 14431};
	static const int	operations[NUM_DEVICES] =
	unsigned int	options = 0;

	status = dio_memory_control_c(num_devices,device_indices,operations,