- ...PCI
- Peripheral Component
Interconnect (PCI) local bus is a high performance 32-bit or 64-bit bus with
multiplexed address and data lines. It's intended to be used as an
interconnect between integrated controller components.
- ...cable
- TURBOchannel-to-VME I/O Subsystem
Technical User's Guide.
- ...TVI
- Refer to Epicure Design Note #123 - VMEbus Interrupter
Module Specification for additional information.
- ...below
- To obtain a complete description of the
executive routines, refer to the VMS document ``Programming Volume 8B,
Device Support, Device Support Reference Manual''.
- ...application
- This assumes
that the target process has adequate virtual resource.
- ...intermittently
- This observation is present when the
allocation and release of DMA PMRs occurs at a high request rate.
- ...ROM
- TURBOchannel Firmware Specification.
- ...subsystem
- 3VIA (DWTVXA), MVIB (DWTVXB), YAbus
interconnect cable, and the VBIM.
- ...application
- The VMS operating system executes the $RUNDWN
system service on behalf of the process that includes closing channels
associated with files and devices. See the VAX/VMS Internals and Data
Structures book for additional information concerning image activation and
exit.
- ...interrupts
- Refer to Epicure Design Note #123 - VMEbus Interrupter
Module Specification for additional information.
- ...(CLI)
- VMS Programming, Volume 3, System Routines.
- ...vector
- With the Q22-bus implementation,
interrupts are generated by writing to specific addresses.
Security, Privacy, Legal
rwest@fsus04.fnal.gov